- 01Instagram Reels ads are full-screen 9:16 videos shown between organic Reels, and people can like, comment, share, save and skip them.
- 02Meta's Ads Guide (checked 2026-10-26) asks for MP4 or MOV, a 9:16 ratio, 1440 x 2560 pixels, and primary text of about 44 characters before it is cut.
- 03Keep the top 14%, the bottom 35% and 6% on each side free of text and logos, or the profile icon and the button will cover them.
- 04Reels ads cannot use licensed music, face or camera effects, GIFs or product tags, so brief the creative to be built for the placement rather than reused from Stories.
- 05Set up ad account and Instagram access through the client's own Business portfolio before the first Reel goes to review.
Instagram Reels ads are full-screen vertical videos that Meta inserts between organic Reels. A viewer who taps into Reels from the Reels tab, Stories, Feed or Explore sees them in the same scrolling viewer as everything else, which means your ad is one swipe away from the next clip at every moment. That shapes almost every decision below, from the file you upload to how you write the first line.
This guide covers what an agency needs to run an Instagram Reels ad for a client: Meta's current specs and the safe zones, how the placement differs from Feed and Stories, what to put in a creative brief, how to set the ad up in Ads Manager, and the account access to sort out first. Every spec here is from Meta's own Ads Guide page for Instagram Reels, loaded on 2026-10-26. Specs change, so check that page again before a launch.
What an Instagram Reels ad is
Reels ads run in the Reels viewer, between organic Reels from accounts a person follows and the recommended ones. According to Meta's Ads Guide (checked 2026-10-26), they can be up to 15 minutes long, and people can comment on, like, view, save, share and skip them in the same way as any other Reel.
The other difference from Feed is the amount of text. Reels ads are a video placement with a short caption, not a text-plus-image unit. Meta's text recommendation for the placement is primary text of 44 characters. Anything longer is cut behind "more". If you've written copy for Facebook feed ads, expect to cut it to a single line here.
Instagram Reels ad specs, from Meta's Ads Guide
These are the design recommendations and technical requirements listed on Meta's Instagram Reels ads page on 2026-10-26.
| Spec | Meta's recommendation |
|---|---|
| File type | MP4 or MOV |
| Aspect ratio | 9:16 |
| Resolution | 1440 x 2560 pixels |
| Video settings | H.264, square pixels, fixed frame rate, progressive scan, stereo AAC audio at 128 kbps or higher |
| Duration | 0 seconds to 15 minutes |
| Maximum file size | 4 GB |
| Minimum width | 250 pixels for ads under 30 seconds, 500 pixels for 30 seconds or longer |
| Captions | Optional, recommended |
| Sound | Optional, strongly recommended |
| Primary text | 44 characters |
Safe zones
Meta asks advertisers to leave at least 14% of the top, 35% of the bottom and 6% of each side free from text, logos and anything else that matters. Those areas are where the profile name, caption, call-to-action button and the right-hand icon column sit, and on phones with screens taller than 9:16 the edges can be cropped as well.
On a 1440 x 2560 canvas, that works out as roughly the top 360 pixels, the bottom 900 pixels and 86 pixels on each side. Put another way, the usable area for text is the middle of the frame, and the bottom third is not yours.
What a Reels ad cannot contain
Meta's page lists things a Reels ad should not include. The ad will either be rejected or the placement won't be available for it:
- Reels published before 15 October 2021
- Licensed music. Meta points to original audio or royalty-free tracks from its Sound Collection instead
- Media that has a face or camera effect
- Media with a GIF
- Media with product tags
- Videos that contain edit lists or special boxes in the file container
The music rule catches people most often. A Reel that a client posted organically with a trending track cannot be boosted as it stands. Either the audio is swapped for something licensed for ads, or the creative is remade.
Reels vs Stories vs Feed placements
Agencies usually run Reels alongside the other Meta placements rather than on their own, so it helps to know what changes between them.
- Reels play in a vertical scroll of other Reels, full screen, with the caption and button overlaid. The viewer skips by swiping up. Sound is common. Text on screen has to respect the safe zones above.
- Stories are also 9:16 and full screen, but they sit in a tap-through sequence between a person's friends' Stories, and they time out. The bottom of the screen carries a swipe-up or button, so the safe zone is different.
- Feed shows the ad inside a scroll of posts at 1:1 or 4:5, with the primary text above the creative and the headline below it. It supports much longer primary text, and a still image works.
In Ads Manager, Advantage+ placements will put one video across all three. That's a reasonable starting point, but if the budget allows for two edits, make one 9:16 cut for Reels and Stories and one 4:5 cut for Feed. Our Facebook ad mockup generator shows how the Feed version will look with its text in place.
Creative tips that hold up in Reels
None of the following are Meta rules. They're working practices for the format.
Open on the subject. The first frame should show the product, the person or the result, not a logo or a title. The viewer decides whether to keep watching before any copy is read.
Design for sound on and sound off. Meta strongly recommends sound, and many Reels viewers have it on. But not all do, so burn in captions for spoken lines, and make sure the visuals carry the point without them.
Shoot vertical, don't crop horizontal. A 16:9 clip cropped to 9:16 loses most of its frame and looks like what it is. If a client only has horizontal footage, a stacked layout with the clip in the middle and a plain colour above and below is better than a crop, as long as the text stays inside the safe zones.
Match the pace of the surroundings. Reels around the ad are cut quickly and shot on phones. An ad that looks like a television commercial stands out, and not in the useful way. Native-looking creator footage, a demonstration or a before-and-after tends to fit the viewer better than polished brand film.
Use the caption as a single line. You have about 44 characters before "more". Put the offer or the hook in that line, and let the video do the rest.
Say what to do, early. The call-to-action button is always present, but people act on what the video tells them. A spoken or on-screen prompt partway through, not only at the end, gives viewers who swipe early something to do.
For more structures to brief, the Facebook video ad examples post lists ten reusable formats, most of which work as a vertical cut.
Setting up an Instagram Reels ad in Ads Manager
The steps in Ads Manager are the same as any other Meta campaign, with a few choices specific to Reels.
- Create the campaign and pick an objective. Meta's Ads Guide lists which objectives and calls to action are available for the Reels placement, so check the objective you want is supported before building.
- Choose placements at the ad set level. Either leave Advantage+ placements on and let Meta include Reels, or choose manual placements and tick Instagram Reels, with Facebook Reels and Stories if you want them. Manual placements let you run a Reels-only ad set with its own 9:16 creative.
- Upload the 9:16 video at the ad level and check the Reels preview, not only the Feed one. The preview shows where the caption, button and icons land on your frame.
- Write the primary text as one line and pick the call-to-action button. Add the destination URL, or the Instagram profile if the goal is followers.
- Check the Instagram account. The ad needs to be linked to the client's Instagram account, not a placeholder, or it runs under the Facebook Page's name. If the account isn't connected to the client's Business portfolio, the Reels placement may not be available at all.
- Submit for review, then check the first day's results by placement. The Reels placement gets its own row in the placement breakdown, so you can see its cost and results next to Feed and Stories.
Measuring Reels ads
Reels ads report through the same columns as every other placement, so the useful habit is the placement breakdown. Compare cost per result and the video play metrics, such as 3-second plays and ThruPlays, between Reels, Stories and Feed for the same ad set. A Reel that holds attention well but costs more per result than Feed may still earn its place if it's reaching people the other placements don't.
Don't quote industry cost benchmarks to a client unless you can name the source and the date. Costs move with the season, the market and the audience, and a figure copied from a blog post written for a different year is worse than no figure. Work out the account's own break-even point instead with the break-even ROAS calculator, and judge the Reels placement against that.
Access you need before the first Reel runs
A Reels campaign for a client runs from the client's own ad account and Instagram account, inside their Business portfolio. That is the setup Meta's partner system is built for, and it means the client keeps ownership when the engagement ends. To get there you need the client to grant your agency access to:
- their Meta ad account, with the role needed to build and launch campaigns
- their Facebook Page, which the ad account posts from
- their Instagram account, linked to that Page and to their Business portfolio
- their pixel or dataset, if the Reel points to a website and you want to report on conversions
Clients rarely know where these settings are, and asking them to find Business IDs and accept partner requests one platform at a time is the slowest part of a launch. ClientInvite sends the client one branded link covering the ad account, Page, Instagram account and pixel together, and they approve each one on Meta's own screens. The step-by-step for the Instagram part is in our guide to requesting access to a client's Instagram account, and the ad account steps are in the Meta ad account access guide. For how the whole set fits together for a paid social team, see Meta ads account access for agencies.
Instagram Reels ads checklist
Before a Reels ad goes to review, check:
- 9:16 video, MP4 or MOV, 1440 x 2560 pixels, under 4 GB
- Text and logos inside the safe zones: not in the top 14%, the bottom 35% or the outer 6% on each side
- No licensed music, face or camera effects, GIFs or product tags
- Captions burned in, sound mixed for people who have it on
- Primary text within about 44 characters, with the offer in it
- The Instagram account linked to the ad account and the client's Business portfolio
- A Reels-specific preview checked in Ads Manager
- The placement breakdown set up so Reels can be judged on its own
Instagram Reels ads reward creative that is made for the placement and penalise creative that is reused from elsewhere. Get the spec right, keep the important parts of the frame in the middle, open on the subject, and sort the client's account access before the deadline rather than on it.